Up one level The Log Rover Project » Design stuff
Design stuff
Temporary area for sharing design ideas with others...

Previous page At last page 33-46 (of 46 found)

 now two main beams, and trial layout of crossmembers

now two main beams, and trial layout of crossmembers

 ram now trial fitted with correct sized bolts

ram now trial fitted with correct sized bolts

 small offcut of side bodywork shows depth loadbed will be on top of the loadbed frame

small offcut of side bodywork shows depth loadbed will be on top of the loadbed frame

 quite a bit of extra wiring to add

quite a bit of extra wiring to add

 Lower mounts for the lifting rams tack welded into place to check positioning

Lower mounts for the lifting rams tack welded into place to check positioning

 Rams in position for checking before final welding. Looking ok.

Rams in position for checking before final welding. Looking ok.

 hinge mockup to test the design

hinge mockup to test the design

 partway open

partway open

 open

open

 frame going together

frame going together

 designing rear quarter panels

designing rear quarter panels